4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Flashing ETC warnng

Thread Tools
 
Search this Thread
 
Old Jan 26, 2017 | 09:53 AM
  #11  
TNtech's Avatar
TNtech
Site Moderator-Dodge Tech
Joined: Sep 2010
Posts: 3,724
Likes: 22
From: Nashville, Tennessee
Default

Originally Posted by Cthulhucalling
The only code it's thrown was P0032 back in November before the throttle problems started. The problem went away after a couple of days, and my mechanic replaced the O2 sensor while trying to figure out the throttle problem. I never get a check engine light when the ETC warning comes on, and don't get any codes.

The mechanic said that while road testing the truck the tranny locked into 4th and threw a code but didn't tell me what it was. He said that it was the solenoid pack and "it's common on Rams". He cleared it and it has never come back. I've never seen it before, and I wonder what the hell he was doing to cause that to happen.


I know these things get ugly when the trail forks while going back and forth between 2 or 3 people. The thing I most dread is getting something someone has already attempted to fix.
 
Reply
Old Jan 26, 2017 | 01:49 PM
  #12  
Cthulhucalling's Avatar
Cthulhucalling
Thread Starter
|
Registered User
Joined: Dec 2016
Posts: 7
Likes: 0
Default

It's been pretty cold today, about 15 degrees colder than it was when I picked up the truck on Monday. Today I started it up, put it in reverse and while my foot was still on the brake, the ETC warning came on. I was seeing behavior like this when we were in Boise and it was pretty cold outside. Not sure if this is temperature related or not, but certainly looks like it.
 
Reply




All times are GMT -4. The time now is 04:16 AM.