4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2014 Ram 1500 4 x 4

Thread Tools
 
Search this Thread
 
  #1  
Old 12-02-2018, 11:20 AM
donato.palumbo@yahoo.com's Avatar
donato.palumbo@yahoo.com
donato.palumbo@yahoo.com is offline
Registered User
Thread Starter
Join Date: Dec 2018
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 2014 Ram 1500 4 x 4

Anybody install a leveling kit on their Ram that can help me out. I just replaced the stock 17" rims with some 20's and want a little more clearance in the wheel well (or just a better look). I don't want to change the overall vehicle height because I'm driving into parking decks all the time and that bar is close enough when I pull in, I want to go with a 2"- 2.5" leveling kit to get the front looking less droopy. My local shop wants to do the kit, upper control arms, and alignment. Does this sound like my best option? anybody else need upper control arms when installing the leveling kit?
A merry Christmas to all, and thanks for the help.
 
  #2  
Old 12-05-2018, 02:04 AM
Arctodus's Avatar
Arctodus
Arctodus is offline
Captain
Join Date: Apr 2011
Location: Southern California
Posts: 622
Likes: 0
Received 1 Like on 1 Post
Default

I also have a 2014 1500 4x4. Put a Hell Bent Steel leveling kit on it. You don't need new control arms but there are some nice aftermarket ones if you go that route. You will need an alignment though. After my leveling it I was able to run 35's with no rubbing. I went with a -12 offset on my new wheels to bring them out a bit.
 
The following users liked this post:
JBizz24 (09-30-2023)



Quick Reply: 2014 Ram 1500 4 x 4



All times are GMT -4. The time now is 12:41 AM.