07 QC 1500 sub enclosure
Thread Starter
|
Rookie
Joined: Jun 2007
Posts: 66
Likes: 0
From:
07 QC 1500 sub enclosure
Anyone interested in a sub enclosure for a 2007 QC 1500?
It started life as a split enclosure designed to hold two 10" subs, but it's height as a unit wouldn't allow me to mount my amp where I wanted to, so I seperated the enclosure's. Now it is 2 seperate 10" enclosures that sit in the storage area beneath the rear seat.
I'm selling one enclosure. This is great for people who want to add a sub, but also still want to be able to stuff things under the back seat.
$40 plus shipping, or free local pickup in Valencia CA. Shipping would probably be between $15-$30. The enclosure is not that heavy without a speaker in it. Gray carpet, fairly well matches the grey carpet in the truck.
Also have a 10" Kicker CVR and a couple different amps, if you're looking for a whole set up.
Matt
It started life as a split enclosure designed to hold two 10" subs, but it's height as a unit wouldn't allow me to mount my amp where I wanted to, so I seperated the enclosure's. Now it is 2 seperate 10" enclosures that sit in the storage area beneath the rear seat.
I'm selling one enclosure. This is great for people who want to add a sub, but also still want to be able to stuff things under the back seat.
$40 plus shipping, or free local pickup in Valencia CA. Shipping would probably be between $15-$30. The enclosure is not that heavy without a speaker in it. Gray carpet, fairly well matches the grey carpet in the truck.
Also have a 10" Kicker CVR and a couple different amps, if you're looking for a whole set up.
Matt
Thread Starter
|
Rookie
Joined: Jun 2007
Posts: 66
Likes: 0
From:
RE: 07 QC 1500 sub enclosure
Here some pics. Sorry for the bad quality.
The first three show the unused portion of the box. It's designed to sit on the right (passenger) side of the truck. The section of board that sticks out to the side was what connected the two enclosures. I just cut the other enclosure off the other end.
The fourth shows the portion I used, in my truck, and how it sits.
The first three show the unused portion of the box. It's designed to sit on the right (passenger) side of the truck. The section of board that sticks out to the side was what connected the two enclosures. I just cut the other enclosure off the other end.
The fourth shows the portion I used, in my truck, and how it sits.
Thread Starter
|
Rookie
Joined: Jun 2007
Posts: 66
Likes: 0
From:
RE: 07 QC 1500 sub enclosure
Ok, well the attachment procedure is apparently smarter than I am, but you get the idea? There's a thread in the 3rd Gen forum I can link to that shows the side I installed in my truck....