Heads are slightly used... less then 1000 miles before they removed. Heads are currently UNLOADED meaning they are missing springs, valves, guides, keepers and retainers.

History of the heads:

This was originally bought as The Hemi Shop 426ci Stroker head to be used in conjuction with an off the shelf Comp Cam. The head was removed from the motor to try to diagnois any issues that may be causing this motor to perform poorly (419rwhp/430ft/lbs). The heads were flow tested and then reworked to achieve an additional 27cfm. However after reworking the cylinder head, a discovery was made with the bottom end causing the customer to go a completely new route. With this route, these heads were no longer needed. Customer has contacted Stu to see if he wanted these returned at no charge and he stated he didnt want them back. So now we have been asked to sell these heads since they are sitting in our shop and cannot be used by our facility to create new heads...The heads for clarification were off a 418ci motor, not a 426ci.

Customer is asking for a best offer. Please shoot me a PM and I will relay all the offers to the customer for his approval. He is a very nice guy and just wants to be done with this build that went sour..

Photos of the heads are attached...

Thanks
James

[IMG]local://upfiles/87923/0264808F1BE34E229A9E11DAEEBFDE87.jpg[/IMG]

[IMG]local://upfiles/87923/D71C9A8D114A4E2EB7521827E0EC4690.jpg[/IMG]

[IMG]local://upfiles/87923/71CC327FADEA4C278FCCAD9A4B69EA64.jpg[/IMG]

[IMG]local://upfiles/87923/0CF907128191400CB672467A0706BC40.jpg[/IMG]

[IMG]local://upfiles/87923/7C987EC834084967B65B3B086B41AA14.jpg[/IMG]