Turbonetics t3/t4 T62-1 good for 200-600hp, flows 65lbmin, 5 bolt flange can be used for internal wastegate or using a block off plate can use an external. T3 side for faster spooling. paid 900 looking for 600

 

bump

 

Some more information:
this is turbonetics sizing matrix based on displacement and hp goals. its helpful for getting an idea what turbo is best for your project.
http://www.turboneticsinc.com/downlo...urboMatrix.pdf

I often get asked "why are you selling" well I bought it last summer to upgrade and replace the t3/t4 to4e-57trim that was in my car. Before i could install it and the bigger injectors I got an offer on the car and sold it. This turno is just sitting on the shelf in its box lubed and ready to go.
The port for the internal wastegate is ported for improved flow (reduced chances of boost spiking) an internal wastegate for the 5 bolt flange turbos is one like this:
http://cgi.ebay.com/T3-T4-5-Bolt-DOW...QQcmdZViewItem

You can also block off the internal port and use an external wastegate by using a plane 5 bolt flange like this:
http://cgi.ebay.com/ebaymotors/Flang...spagenameZWDVW

http://cgi.ebay.com/ebaymotors/t3-t4...spagenameZWDVW

http://cgi.ebay.com/ebaymotors/3-5-b...spagenameZWDVW

 

forgot to mention its a stage5 .63 a/r