543 Cubic Inch Mopar, Block is a 1970 440 4.380 Bore, with a 4340 steel crank 4.50 stroke with 2.20 journal size, 4340 I Beam rods with ARP 2000 Bolts, Forged-24 Dished Pistons, Total Seal Moly File fit Rings, H Series Rod Bearings, V Series Main Bearings, Hughes 610 Solid Lift Cam Shaft,Lifters,Push Rods,One Bolt Timing Chain, Hughes 3/8" Push Rods, Hughes Edelbrock Victor 440 Heads With 2.20 Severe Duty Stainless Valves, 1.550 Valve Springs with .700 Lift. 7 degree Hardened Retainers. Hughes 1.6 Rockers, ARP Hold Down Bolts, ARP Head Bolts. Hughes Edelbrock Victor 440 Intake with ARP Bolts. Milidon Oil Pump, Oil Pan with Single Line Static Pick up, Sheet Metal Valve Covers. SFI Balancer, ARP Hex Crank Bolt,Mancini Coil Bracket, Mancini Raised Throttle Bracket, Mini Starter, Complete March Serpentine System with Billet Power Steering Pump, A/C Compressor, Alternator, Alum Water Pump and Housing.(PUMP GAS 10.41 COMPRESSION)
View More Photos At http://www.racingjunk.com/category/9...NCH-MOPAR.html

Asking $9,000 WILL LISTEN TO ALL OFFERS MUST SELL
Call Jim 859-398-5794
or Keith 859-398-5735

 

Enigine is Brand NEW Never Fired based off a 800 hp pupm gas street engine. Was built for 65 coronet resto mod to participate in the Hot Rod Power Tour

 

Try the link below . Good luck.


*****