Brand New 94-01 Dodge Ram Street Scene Bumper Cover w/Vent CutOuts Retail Retail $400
#1
06-03-2009, 05:39 PM
Join Date: Jun 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Brand New 94-01 Dodge Ram Street Scene Bumper Cover w/Vent CutOuts Retail Retail $400
Brand New 94-01 Dodge Ram Street Scene Bumper Cover w/ Vent Cut Outs
Retail is around $400 but I am taking all offers, please PM me. I can deliver it in California from the bay area down to LA. Looks similar to the picture below when installed. Needs to be sanded, prepped and painted since it is currently matte white.
MADE FROM HAND LAID FIBERGLASS **This bumper cover will not fit SPORT models. This bumper cover is designed to go over the existing stock bumper.
http://www.extremestyling.com/Bumper...B0019RB2R8.htm
INSTALLATION INSTRUCTIONS
TOOL LIST
Drill Motor, Safety Glasses, 1/4" Drill Bit, 3/8" Ratchet, 3/8" 6" Extension, 3/8" # 25 Torx Socket
1. Before beginning installation be sure to wear proper eye protection.
2. Remove the # 25 Torx head screws securing the air deflector to the front bumper. Save all hardware.
3. Starting at one corner, slip th bumper cover over the bumper and gently pull to the opposite side and
snap over the bumper.
4. Drill with the 1/4" drill bit through the bumper cover and into the holes in the bumper where the air
deflector was removed.
5. Re-install the air deflector over the bumper cover and attach with the bolts removed in step 2.
6. Paint to match. Follow fiberglass parts surface preparation procedures.
Retail is around $400 but I am taking all offers, please PM me. I can deliver it in California from the bay area down to LA. Looks similar to the picture below when installed. Needs to be sanded, prepped and painted since it is currently matte white.
MADE FROM HAND LAID FIBERGLASS **This bumper cover will not fit SPORT models. This bumper cover is designed to go over the existing stock bumper.
http://www.extremestyling.com/Bumper...B0019RB2R8.htm
INSTALLATION INSTRUCTIONS
TOOL LIST
Drill Motor, Safety Glasses, 1/4" Drill Bit, 3/8" Ratchet, 3/8" 6" Extension, 3/8" # 25 Torx Socket
1. Before beginning installation be sure to wear proper eye protection.
2. Remove the # 25 Torx head screws securing the air deflector to the front bumper. Save all hardware.
3. Starting at one corner, slip th bumper cover over the bumper and gently pull to the opposite side and
snap over the bumper.
4. Drill with the 1/4" drill bit through the bumper cover and into the holes in the bumper where the air
deflector was removed.
5. Re-install the air deflector over the bumper cover and attach with the bolts removed in step 2.
6. Paint to match. Follow fiberglass parts surface preparation procedures.