NEW 94-01 Dodge Ram Street Scene Bumper Cover
#1
NEW 94-01 Dodge Ram Street Scene Bumper Cover
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
MADE FROM HAND LAID FIBERGLASS **This cover will not fit 99-01 Sport models. It will fit 94-98 sport models.. This bumper cover is designed to go over the existing stock bumper.
INSTALLATION INSTRUCTIONS
TOOL LIST
Drill Motor, Safety Glasses, 1/4" Drill Bit, 3/8" Ratchet, 3/8" 6" Extension, 3/8" # 25 Torx Socket
1. Before beginning installation be sure to wear proper eye protection.
2. Remove the # 25 Torx head screws securing the air deflector to the front bumper. Save all hardware.
3. Starting at one corner, slip th bumper cover over the bumper and gently pull to the opposite side and
snap over the bumper.
4. Drill with the 1/4" drill bit through the bumper cover and into the holes in the bumper where the air
deflector was removed.
5. Re-install the air deflector over the bumper cover and attach with the bolts removed in step 2.
6. Paint to match. Follow fiberglass parts surface preparation procedures.
MADE FROM HAND LAID FIBERGLASS **This cover will not fit 99-01 Sport models. It will fit 94-98 sport models.. This bumper cover is designed to go over the existing stock bumper.
INSTALLATION INSTRUCTIONS
TOOL LIST
Drill Motor, Safety Glasses, 1/4" Drill Bit, 3/8" Ratchet, 3/8" 6" Extension, 3/8" # 25 Torx Socket
1. Before beginning installation be sure to wear proper eye protection.
2. Remove the # 25 Torx head screws securing the air deflector to the front bumper. Save all hardware.
3. Starting at one corner, slip th bumper cover over the bumper and gently pull to the opposite side and
snap over the bumper.
4. Drill with the 1/4" drill bit through the bumper cover and into the holes in the bumper where the air
deflector was removed.
5. Re-install the air deflector over the bumper cover and attach with the bolts removed in step 2.
6. Paint to match. Follow fiberglass parts surface preparation procedures.