I bought these Street scene grille inserts (4) because i wanted to paint my grille shell black and leave the center crome.. well i did it and didnt like it, too sporty for me.. but someone with a sport truck.. this would fit right in

so im selling the inserts - ONLY THE INSERTS ARE INCLUDED IN THIS LISTING

the inserts are made to just lay over your existing grille inserts and be zip tied in - they didnt come with instructions.. apparently you have to go to the street scene website to download them.

but i took a saw and cut out my factory inserts and then installed the new ones and it looked much better... how ever you want to install them is up to you

they are in perfect condition and have no scratches...

you will need a few zip ties to install these.. you could prolly pick em up at a local hardware store for under $5

have any questions feel free to ask

my feedback is perfect and i will be shipping usps priority mail

fits 4th gen rams (new body style) 1500s only

they are black chrome style and i will only accept paypal..

 

you dont have to cut anything to install them. I just did it because i had the chrome stock inserts and had i left them in you would have seen them behind the black street scene grille.

they are held in place by zip ties.. so there is no drilling or cutting of anything.

here is the link to the instructions to install them if you want to see.

http://www.streetsceneeq.com/instruc.../950-78523.pdf

1. Open hood.
2. Open Speed Grille insert packages. Set Speed Grilles on a table or bench and identify for location.
3. It is not necessary to remove the grille shell from the vehicle to install the Speed Grille. The Speed Grille
inserts will be attached to grille shell the installation straps. Use six straps per one grille section. Loop
the strap through the loop on the Speed Grille and then around the horizontal bar on grille shell. Install
all straps loosely and snug up equally, centering the Speed Grille in opening. There should be an 1/8"
to 3/16" clearance gap on all sides. After you are sure of the placement of Speed Grille, Pull all straps
snug and cut off the excess. Do the same on all the grille sections. Cut off excess plastic from straps.

let me know if you need any more info