I have an assortment of some really nice Performance parts for
A 1997-2003 V6 Dakota, and some of the stuff I have is also
compatible with with 318 & 360 too, I believe, and may also
fit Rams with same Engine set-up, such as Oil filters, seals
bearings, etc....Please do your Research for the other possible applications.
I joined here in April this year,
but have had Very limited exposure, so any Questions/Concerns,
just ask.

I SHIP OUT FAST, I AM ON JOB HIATUS, AND HAVE NOTHING
BUT TIME, SO WHEN YOU SEND ME YOUR HARD EARNED MONEY,
YOU WILL HAVE A TRACKING# THE SAME OR VERY NEXT DAY!
IF I GET HIT BY A BUS, THEN MY BROTHER OR MOTHER-IN-LAW
WILL GET YOUR PACKAGE OUT! IN OTHER WORDS, YOUR PARTS
WILL SHIP AS STATED, NO EXCUSES, NO BULLSH*T.

OK, now for the good stuff!......All prices ive listed I believe
are more than fair, as far as maintenance stuff listed, its all
the Best stuff, etc, Timken, or Factory, Amsoil, and you can
do your own research as far as prices.

Prices listed are "PLUS" Shipping and if paying by Paypal, no
additional Fee's are charged.... (Money Order & Paypal are
Fine.......Email for Paypal address)


A) (8) FORD 4-HOLE 19# INJECTORS....NEW REMAN BOUGHT
ON eBay a few months ago, but Never Installed...THESE ARE
FLOW-MATCHED, NEW O-RINGS, ETC, AS STATED, NEW NEVER INSTALLED,..........$95 Firm

http://i1178.photobucket.com/albums/...otos55/003.jpg

http://i1178.photobucket.com/albums/x367/myphotos55/001.jpg

B) NEOPRENE SEAT COVERS....1-MONTH NEW AND ARE NEW
STILL PERFECT CONDITION....BLACK OUTER w/CHARCOAL MIDDLE,
PAID $200 ON eBay ................................................$1 00 Firm

http://i1178.photobucket.com/albums/...tos55/2343.jpg

http://i1178.photobucket.com/albums/x367/myphotos55/0132.jpg

C) FACTORY DODGE DAKOTA FLOOR MATS IN NEAR NEW CONDITION 4-PIECE
CHARCOAL FACTORY COLOR MATCHED............................$40
Firm
http://i1178.photobucket.com/albums/...tos55/0043.jpg

D) ALL OF THE FOLLOWING ITEMS LISTED HERE ARE BRAND NEW
IN THERE PACKAGING...1-LUBE-LOK 8.25 REAR DIFF. GASKET....
.1-V6 WATER PUMP GASKET...1-TB GASKET.....1-8.25 REAR PINION
NUT w/WASHER INCORPOTATED INTO THE NUT (NEW VERSION)...
..PLUS THE 8.25 TIMKEN PINION SEAL....1-42RE 2WD REAR INPUT
TIMKEN TRANSMISSION SEAL.....2-TIMKEN REAR AXLE BEARING
AND SEAL KIT...BOTH WHEELS...There is about $130 ..........................................$60 Firm

http://i1178.photobucket.com/albums/...tos55/0102.jpg

E) THE FOLLOWING HERE ARE ALSO BRAND NEW NEVER
INSTALLED.....3-QUARTS AMSOIL SEVERE GEAR 75w-140
GEAR OIL....1-QUART MOPAR ATF+4....6-AUTOLITE SPARK
PLUGS 3923'S.....1-AC/DELCO SERPENTINE BELT PART# 7K975
& BRAND NEW BELT TENSIONER ASSEMBLY......2-AMSOIL EA042
OIL FILTERS........There is about $220 here...........$80 Firm

http://i1178.photobucket.com/albums/...tos55/0062.jpg

http://i1178.photobucket.com/albums/...otos55/019.jpg

F) 2001-2003 Dodge Dakota 2WD V6 Modified
Intake Hi-Performance V6 PORTED & POLISHED
& RUNNER MODIFIED KEGGER w/TURTLE INSERT,
ALL PORT & GASKET MATCHED .....NEW HUGHES
ALUMINUM BELLY PLATE KIT INSTALLED ALONG
WITH THE TURTLE, PLATE IS SECURED USING RED
SILICONE.....THIS INTAKE HAS A FACTORY V6
"THINNED SHAFT" MODDED THROTTLE BODY THAT
WAS MODIFIED PROFESSIONALLY COMPLETE WITH
ALL SENSORS INTACT & A FRESH TB GASKET TO
AIRHAT RING.......
.ALSO INSTALLED ON THE INTAKE IS A NEW
FACTORY WATER NECK, NEW STAINLESS STEEL NAPA
GOLD 180* THERMOSTAT, & GASKET.....BRAND NEW
AC/DELCO TEMP SENSOR....

AND BRAND NEW FROM HUGHES, A SET OF ARP
STAINLESS STEEL INTAKE BOLTS, ALONG WITH THE
FULL REST OF THE FELPRO INTAKE GASKET SET & A
BRAND NEW FACTORY BY-PASS HOSE & CLAMPS......
ALL FASTENERS HAVE BEEN TORQUED TO FACTORY
SPECS....

THE KEGGER WENT THRU A COMPLETE HOT TANK DIP,
RUNNERS SHORTENED ABOUT 2", PORT & GASKET
MATCHED, AND 3-STAGE HEAT TREATED PROCESS,
1ST USING HI-TEMP PRIMER, HI-TEMP SILVER PAINT &
HI-TEMP CLEAR COAT BY ME WHICH I WILL PUT UP AS
MANY PIC'S AS POSSIBLE.


(THIS IS WHAT I HAVE INTO THE COMPLETE UNIT,
NOT INCLUDING MODDED LABOR, JUST TALKING
ABOUT PARTS $......USED KEGGER.....$60......
FACTORY V6 MODIFIED THROTTLE BODY.....$120......
HUGHES ALUM BELLY PLATE KIT.....$95.....
TURTLE.....$85.....WATER NECK, STAT & GASKET,
TEMP SENSOR, & GASKET SET.....$70.....ARP STAINLESS
STEEL INTAKE MANI-BOLTS....$50......SO IM AT $480 PARTS
ALONE, NO LABOR INCLUDED FOR ANY MODDS, OR ASSEMBLY)

http://i1178.photobucket.com/albums/...otos55/027.jpg

http://i1178.photobucket.com/albums/...otos55/026.jpg

http://i1178.photobucket.com/albums/...otos55/031.jpg

http://i1178.photobucket.com/albums/...otos55/035.jpg

http://i1178.photobucket.com/albums/...otos55/038.jpg

http://i1178.photobucket.com/albums/...otos55/035.jpg

http://i1178.photobucket.com/albums/...otos55/037.jpg

http://i1178.photobucket.com/albums/...otos55/051.jpg

http://i1178.photobucket.com/albums/...otos55/039.jpg

http://i1178.photobucket.com/albums/...otos55/036.jpg

http://i1178.photobucket.com/albums/...os55/005-1.jpg

http://i1178.photobucket.com/albums/...os55/001-1.jpg

http://i1178.photobucket.com/albums/...otos55/002.jpg

http://i1178.photobucket.com/albums/...os55/003-1.jpg

http://i1178.photobucket.com/albums/...os55/005-1.jpg

http://i1178.photobucket.com/albums/...otos55/028.jpg

http://i1178.photobucket.com/albums/...otos55/030.jpg

SO I WILL LISTEN TO OFFERS ON THE KEGGER SET-UP,
BUT LETS BE REASONABLE PLEASE



.
.