2nd Gen Transfer Case NP231
Thread Starter
|
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
2nd Gen Transfer Case NP231
Pulled from 2000 Dodge Ram 1500
It sat behind the infamous 46re automatic transmission, so it's input spline is 23.
Factory 2.72 ratio
Perfect working order it's entire life. Only added fluid and put the rear tailhousing transfer case saver on a year ago as a preventive measure.
Info on that here
Rear seal replaced per the above. New input and front output seals accompany this transfer case.
$275 OBO + Shipping (fluid has been drained)
Location 95630 (Sacramento CA area)
It sat behind the infamous 46re automatic transmission, so it's input spline is 23.
Factory 2.72 ratio
Perfect working order it's entire life. Only added fluid and put the rear tailhousing transfer case saver on a year ago as a preventive measure.
Info on that here
Rear seal replaced per the above. New input and front output seals accompany this transfer case.
$275 OBO + Shipping (fluid has been drained)
Location 95630 (Sacramento CA area)
Thread Starter
|
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Oh man, I gotta believe there are ones closer to you!! Have you checked maybe car-part.com??
I did a quick estimate here and looks like roughly $180 USD shipping. Dimensions and weight are estimates, so take this as a reference. If you want more detail then will have to check tomorrow.
I did a quick estimate here and looks like roughly $180 USD shipping. Dimensions and weight are estimates, so take this as a reference. If you want more detail then will have to check tomorrow.