VERY CHEAP!!!! 1984 Mustang GT, Built engine Lots of Add Ons
CHECK IT OUT ON EBAY MOTORS!!!!!!!!!!!! VERY CHEAP!!!!!
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4638341554
Vehicle is a 1984 Mustang Gt converted to the 87 -93 body style, Paint needs to be re-done, Shortblock was built by Griggs Performance in houston Tx, invested around 2200 dollars in just the shortblock, i have all the engine receats from engine builder.
Vehicle has no interior, only a seat and shifter,
also have an extra B&m Pro stick shifter i will inlude,
Engine is a 302 bored .040 ( 308 cubic inches )
Holley 650 Double Pumper just rebuilt,
Edlebrock Performer RPM Intake,
Converted heads to roller rocker style,
Stock HO heads,
Electric water pump,
Dual Electric fans,
MSD 6A ignition and Pro Billet Distributor with Blaster 2 COIL
ARP Bolts in Crank mains and Rods,
engines rotating assembly as been fully balanced,
New Kieth black Slivolite pistons, Rods have been strengthened and hardened,
Engine only has about 6,000 miles since built, Raced only about 10 times,
Vehicle went an 8.65 at 85 miles per hour on Slicks 1/8th Bile Times with old Edlebrock Carbeurator,
8.8 rear end with stock 3.08 gears, 5-speed manual transmission with King Cobra 10 1/2 in clutch and flywheel,
Steeda Billit Firewall clutch cable adjuster and Billit Steeda Clutch Quadrant,
Any othr queations e-mail me at jerrytotin@yahoo.com
or call me at 281-785-9936
Vehicle Located in houston TX cannot deliver or ship unless buyer pays for shipping,
CHECK IT OUT ON EBAY MOTORS!!!!!http://cgi.ebay.com/ebaymotors/ws/eB...tem=4638341554
[IMG]local://upfiles/24877/E9FFE67CCEE742D095B73700B5FCA7FD.jpg[/IMG]
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4638341554
Vehicle is a 1984 Mustang Gt converted to the 87 -93 body style, Paint needs to be re-done, Shortblock was built by Griggs Performance in houston Tx, invested around 2200 dollars in just the shortblock, i have all the engine receats from engine builder.
Vehicle has no interior, only a seat and shifter,
also have an extra B&m Pro stick shifter i will inlude,
Engine is a 302 bored .040 ( 308 cubic inches )
Holley 650 Double Pumper just rebuilt,
Edlebrock Performer RPM Intake,
Converted heads to roller rocker style,
Stock HO heads,
Electric water pump,
Dual Electric fans,
MSD 6A ignition and Pro Billet Distributor with Blaster 2 COIL
ARP Bolts in Crank mains and Rods,
engines rotating assembly as been fully balanced,
New Kieth black Slivolite pistons, Rods have been strengthened and hardened,
Engine only has about 6,000 miles since built, Raced only about 10 times,
Vehicle went an 8.65 at 85 miles per hour on Slicks 1/8th Bile Times with old Edlebrock Carbeurator,
8.8 rear end with stock 3.08 gears, 5-speed manual transmission with King Cobra 10 1/2 in clutch and flywheel,
Steeda Billit Firewall clutch cable adjuster and Billit Steeda Clutch Quadrant,
Any othr queations e-mail me at jerrytotin@yahoo.com
or call me at 281-785-9936
Vehicle Located in houston TX cannot deliver or ship unless buyer pays for shipping,
CHECK IT OUT ON EBAY MOTORS!!!!!http://cgi.ebay.com/ebaymotors/ws/eB...tem=4638341554
[IMG]local://upfiles/24877/E9FFE67CCEE742D095B73700B5FCA7FD.jpg[/IMG]



