Measurements behind seats in 2005 QC??
Thread Starter
Joined: Apr 2005
Posts: 2
Likes: 0
Measurements behind seats in 2005 QC??
Hey all,
First post....
I'm looking to install some (or at least one) woofer(s) behind my seats. I have a 1500 QC and I don't really want to lose the floor panel foldouts and I was curious if anyone who has a similar Ram has gone through the brain damage of measuring out the area to see what kind of box I can get back there. I've been looking at the pre-fab as Crutchfields as an option, but still would like to know the dimensions if they are public knowledge.
-Rich
First post....
I'm looking to install some (or at least one) woofer(s) behind my seats. I have a 1500 QC and I don't really want to lose the floor panel foldouts and I was curious if anyone who has a similar Ram has gone through the brain damage of measuring out the area to see what kind of box I can get back there. I've been looking at the pre-fab as Crutchfields as an option, but still would like to know the dimensions if they are public knowledge.
-Rich
Joined: Apr 2005
Posts: 18
Likes: 0
From:
RE: Measurements behind seats in 2005 QC??
Hey Rich,
I have a 2004 1500 QC and I have made a customer fiberglass enclosure for my Sub. I can tell you that the two tubs in the back(one on drivers side,one on passenger side) are about 6" X 10" x 5"
If I can remember correctly the length from driver side to passenger side. is 56"
And depending on you setup with fold out floor I thing it is about 13" from front to the support bars.
Not sure if this helps you at all.
Thanks
DUstin
I have a 2004 1500 QC and I have made a customer fiberglass enclosure for my Sub. I can tell you that the two tubs in the back(one on drivers side,one on passenger side) are about 6" X 10" x 5"
If I can remember correctly the length from driver side to passenger side. is 56"
And depending on you setup with fold out floor I thing it is about 13" from front to the support bars.
Not sure if this helps you at all.
Thanks
DUstin