Activate 0-60 timer
Ok, I've read the owner's manual, called the dealer, and searched this forum but I still can't find out how to activate the 0-60 timer on the Charger SRT8.
Is there a manual for features like that and for procedures like turning off the ECP?
Is there a manual for features like that and for procedures like turning off the ECP?
on your steering wheel press the button that looks like two pages then hold the music key and the nav buttons down at the same time for about 7 seconds then use the up and down buttons on your steering wheel til you get to your 0-60 timer
Thanks, best210. That worked. Are those guns?
For everyone's edification (yeah, I'm that kind of doctor), here is a rundown of what that activates (v, ^, and > represent the navigation arrows on left spoke of the steering wheel):
CCN Software Info
6/28/06 v. 5.34
pn 04844687AE
v 0-60 Timer
> Best time
v Digital MPH display
v Voltage display
v MPG on - to + scale
v Last Chm:
VTA:
Wake:
VMM 543
(don't know what any of this is)
v Auto HLSens:
TC:
Thld:
HBduty:
(don't know what this is)
v MinL = 190 MinR = 195
Lt = 24 Rt = 5
19g AVG= 24
(don't know what this is)
v Compass Raw: (in degrees)
Oil pressure
Pdl pos: (gives % throttle)
v TempAVG: (outside temp, I think)
TempRAW:
v Speed= RPM= (digital speed & rpm display)
Eng temp:
Batt: (volts)
Hope this is useful to some and hope someone knows what some of the questionable displays are.
For everyone's edification (yeah, I'm that kind of doctor), here is a rundown of what that activates (v, ^, and > represent the navigation arrows on left spoke of the steering wheel):
CCN Software Info
6/28/06 v. 5.34
pn 04844687AE
v 0-60 Timer
> Best time
v Digital MPH display
v Voltage display
v MPG on - to + scale
v Last Chm:
VTA:
Wake:
VMM 543
(don't know what any of this is)
v Auto HLSens:
TC:
Thld:
HBduty:
(don't know what this is)
v MinL = 190 MinR = 195
Lt = 24 Rt = 5
19g AVG= 24
(don't know what this is)
v Compass Raw: (in degrees)
Oil pressure
Pdl pos: (gives % throttle)
v TempAVG: (outside temp, I think)
TempRAW:
v Speed= RPM= (digital speed & rpm display)
Eng temp:
Batt: (volts)
Hope this is useful to some and hope someone knows what some of the questionable displays are.


