Just got my SRT-8 and love it!
I am in new york and we are required to have two license plates.
My car came from Michigan, so the person before me did not have to have a plate in the front.
Any ideas on what to do? I would hate to drill on the bumper... it looks so nice as it is now.
Any hints will be appreciated.
Thank You!

 

Don't run a front plate and see if anyone says anthing. I lived in NYC my whole life and in 1995 moved to Setttle, Washington (also requires a front plate). I haven't used a front license plate it years. On the rare occasion that I get harrassed about it,I keep it under the front seat mats to show the nice officer. But if you want to stick to the letter of the law...there must be some kind of clamp on doohickey out there! Good Luck!

 

I used industrial strength Velcro and Loctite. No problem for over a year.

 

I'd try eBay first, but you can pick one up at any Dodge dealership. I found this one oneBay: http://cgi.ebay.com/ebaymotors/DODGE...QQcmdZViewItem

 

Hiya, the dodge parts department has a great double sided tape. They use alot when the need arises to replace emblems on cars and trucks. Perhaps there is a way you can incase the plate in a holder and stick it on. This tape will not damage your paint to boot. But, you will need to use Pro-Sol to remove it. Good luck.

[IMG]local://upfiles/71292/45ABD5CFEFE847E09F1A2DD25515860B.jpg[/IMG]

[IMG]local://upfiles/71292/620FAEBFDDDC418BAC62C0C6D25633E8.jpg[/IMG]