Dodge Caliber The new sporty Dodge Caliber is a hatchback that replaces the Dodge Neon. The Dodge Caliber is here to stay!

Are there any people on this forum that work for Dodge ?

Thread Tools
 
Search this Thread
 
Old Nov 29, 2007 | 07:47 PM
  #1  
Jib01's Avatar
Jib01
Thread Starter
|
Registered User
Joined: Feb 2007
Posts: 43
Likes: 0
From:
Default Are there any people on this forum that work for Dodge ?

If there are, could you tell us where to get the following or post here for us......

A Dodge test report showing Gas Mileage vs RPM vs Speed for each of the Engine and transmission combinations ? I know there is one and how do we access the information...

Regards
Jib01
 
Reply
Old Dec 1, 2007 | 06:37 PM
  #2  
TUNDRA_schumacher's Avatar
TUNDRA_schumacher
Captain
Joined: Apr 2006
Posts: 670
Likes: 0
From: Springfield, Ohio
Default RE: Are there any people on this forum that work for Dodge ?

There used to be one in here. Don't know if they still read here or not.
 
Reply
Old Dec 1, 2007 | 06:37 PM
  #3  
TUNDRA_schumacher's Avatar
TUNDRA_schumacher
Captain
Joined: Apr 2006
Posts: 670
Likes: 0
From: Springfield, Ohio
Default RE: Are there any people on this forum that work for Dodge ?

There used to be one in here. Don't know if they still read here or not.
 
Reply
Old Dec 2, 2007 | 01:16 PM
  #4  
bigtsr's Avatar
bigtsr
Captain
Joined: Jun 2006
Posts: 518
Likes: 1
From: Burlington.Ontario.Can
Default RE: Are there any people on this forum that work for Dodge ?

How is this Jib01-maybe this is what you were looking for!!!


[IMG]local://upfiles/36523/7473807B7E2C4AADAA847B041BDDB9D9.jpg[/IMG]
 
Reply
Old Dec 4, 2007 | 12:23 AM
  #5  
Jib01's Avatar
Jib01
Thread Starter
|
Registered User
Joined: Feb 2007
Posts: 43
Likes: 0
From:
Default RE: Are there any people on this forum that work for Dodge ?

bigtsr,

Good start, now what is the rpm at those speeds ? This is not a Chrysler Corp chart. But it looks pretty good and agrees with what I am getting. I'm probably doing a little better than that curve. I drive 70-72 on the freeway and even with some town driving I get 27mpg. How many miles on this Caliber that was used as the test car ?

Jib01
 
Reply
Old Dec 4, 2007 | 08:16 AM
  #6  
bigtsr's Avatar
bigtsr
Captain
Joined: Jun 2006
Posts: 518
Likes: 1
From: Burlington.Ontario.Can
Default RE: Are there any people on this forum that work for Dodge ?

I get better than EPA estimates consistently myself and have no gripes
with the Caliber after a 1-1/2 of driving it.
I found that after the TSB 18-031-07 was done my rpms
at 65 mph dropped by 300-400 rpm and hiway mpg jumped.
If you look at the chart I posted you can see the authors
email address,I would suggest you might try getting in touch
with him,he is a Caliber owner and appears to be into automotive
research.
 
Reply
Old Dec 4, 2007 | 10:19 AM
  #7  
Jib01's Avatar
Jib01
Thread Starter
|
Registered User
Joined: Feb 2007
Posts: 43
Likes: 0
From:
Default RE: Are there any people on this forum that work for Dodge ?

bigtsr,

When did you get your Caliber and when did you have 18-031-07 done ? What are your rpms at 65. I asked for information on that TM but they said because of when my vehicle was made I didn't need it.

Regards
Jib01
 
Reply
Old Dec 4, 2007 | 08:29 PM
  #8  
bigtsr's Avatar
bigtsr
Captain
Joined: Jun 2006
Posts: 518
Likes: 1
From: Burlington.Ontario.Can
Default RE: Are there any people on this forum that work for Dodge ?

Well my SXT was a June 06 build and had all the criteria for the flash,
plus the fact that the Service Mgr at my dealership have had an ongoing
service history since 1985 and get along quite well.
The rpm at 65 mph dropped from approx 2450 to approx 2175 after the flash,
it didn't seem to be a noticable drop at city speeds but I always got
approx 26-27 mpg US in the city before the flash.
The added bonus was that it ran quieter to boot.
 
Reply
Old Dec 8, 2007 | 10:18 AM
  #9  
Jib01's Avatar
Jib01
Thread Starter
|
Registered User
Joined: Feb 2007
Posts: 43
Likes: 0
From:
Default RE: Are there any people on this forum that work for Dodge ?

Ok, I just wanted to verify because mine is a Jan 07 build and wanted to make sure that TM was in mine. I get the same rpm at that speed so I must have the upgrade already. Good to know. I'll be climbing some hills during the Christmas season.

JIb01
 
Reply




All times are GMT -4. The time now is 07:55 PM.