Want to remove Stow n Go seats
#1
Want to remove Stow n Go seats
Howdy. I am new here. I just bought my '05 GV 2 weeks ago. It is for work. I do not need any of the Stow n' Go seats. In fact, I'd love to have the storage space. These seats are clean and look never used, so perhaps they have some value. No idea. Anyone know if there is a market for them?
But how difficult are they to remove? It looks like the middle buckets come out as one unit. Or are they, in fact, separate?
I imagine someone has done this before.
Thx,
Todd
But how difficult are they to remove? It looks like the middle buckets come out as one unit. Or are they, in fact, separate?
I imagine someone has done this before.
Thx,
Todd
#2
They are seperate. Not aware of a huge market for them but you never know til you try. They are time consuming to remove but not to tough. Fold the seats into the floor, remove the trim surrounding the openings. Clamp a visegrip onto the seats pivot shaft so when you remove it, it can't slide over to the side or you can get big ouch. remove the 3 nuts holding it in and pull it out.
Here's how the service manual say's to do it
REMOVAL
Special Tools: Click to hide the list of tools used in this procedure
Essential Tools
Click here to launch the form to order any tools you need.
9313 - Clip, Seat Articulation
Originally Shipped In Kit Number(s) 9313-CAN, 9328, 9328-CAN.
1.Place 2nd row seats in upright position.Fig. 1
Fig. 1 - SECOND ROW SEATS - FOLD-IN-FLOOR
1 - ATTACHING NUTS 2 - SEATS IN THE UPRIGHT POSITION 2.Place special tool # 9313 R1 on seat shaft .
NOTE: Be sure special tool # 9313 R1 is firmly seated. Failure to do so could result in injury.' 3.Remove seat from vehicle.
Here's how the service manual say's to do it
REMOVAL
Special Tools: Click to hide the list of tools used in this procedure
Essential Tools
Click here to launch the form to order any tools you need.
9313 - Clip, Seat Articulation
Originally Shipped In Kit Number(s) 9313-CAN, 9328, 9328-CAN.
1.Place 2nd row seats in upright position.Fig. 1
Fig. 1 - SECOND ROW SEATS - FOLD-IN-FLOOR
1 - ATTACHING NUTS 2 - SEATS IN THE UPRIGHT POSITION 2.Place special tool # 9313 R1 on seat shaft .
NOTE: Be sure special tool # 9313 R1 is firmly seated. Failure to do so could result in injury.' 3.Remove seat from vehicle.
#3