[5th Gen : 08+]: Sliding door cable
So as part of the passenger sliding door assembly there is a plastic pulley with springs that slides along a cable as the door goes back and forth. It broke off the mount point. What is the part number or assembly I need to get to replace this?
You can try here. Or contact your dealer parts dept.
http://www.factorychryslerparts.com/...5109610AA.html
http://www.factorychryslerparts.com/...5109610AA.html
I don't think that is it. This is like a guide wire that is part of the assembly. Maybe part of the 19 assembly. I would like to see a picture of that part and maybe part 13 but I may need to go to a parts desk
I wasn't implying that was the correct part, just a place to possibly research the part number.
Trending Topics
I understand and appreciate the link! Thanks.
So I found the bolt. which looked fine. Could it have just unscrewed on its own and all I have to do is fish the cable back out from the track and reattach? If not it looks like there are 3 or 4 torx bolts that hold the track to the frame and it should come right out being careful to unplug the flex wire bundle and other wire harness. Does that sound about right?
So I found the bolt. which looked fine. Could it have just unscrewed on its own and all I have to do is fish the cable back out from the track and reattach? If not it looks like there are 3 or 4 torx bolts that hold the track to the frame and it should come right out being careful to unplug the flex wire bundle and other wire harness. Does that sound about right?






