I installed the noESP circuit board today and it works like a champ.

Functionality it has nothing over the standard $20 ESP mod. Aesthetically it’s the bomb hands down!

It hooks into the same violet w/light blue tracer wire as the ESP mod but alsotaps the ESP switch forground and switch signal.

Working off the Stock ESP button:

Press the button once and “Mr Squiggly” lights up, activating stock ESP setting.

Press and hold the button and hold for 5 seconds and “Mr Squiggly” + BAS lights up, disabling ESP.

Now I'll utilize the old ESP switch to operate a remote bottle opener.

 

hehe dirty dog !!!!!

 

When I turn my ESP off I can burn the tires quite easily. So what does this mod do, make it even easier?

 

Hey Mango,

Can you get some pictures for us. What was the web link for noESP circuit board. Thanks

 

Not easier but transparent, functionality it has nothing over the standard $20 ESP mod. Aesthetically it’s the bomb hands down!

Here's a pic. Add .com to the end of noESP for their web.

The install isn't bad it took me roughly 15 minutes, but I was familiar with the things that needed to come off for the install.

[IMG]local://upfiles/33009/2015AA6142844ED2975D14881DA8C03E.jpg[/IMG]

Cut the existing violet wire w/light blue tracer stripe.
Red wire - Tie into the end of the violet wire w/light blue tracer that runs tothe front.

Yellow wire - Tie into the end of the violet wire w/light blue tracer that runs to the rear.

Black wire - Taps the ESP switch black/light green tracer stripe wire.

Green wire - Taps the ESP switch dark green/white tracer stripe wire.

Mine came w/2 wire Taps and 3 barrel connectors. Their online PDF instructions are not bad, the only thing I thought it neededwasa close-up pic of thethe violet wire w/light blue tracer stripe for those that haven't done this mod in the past.

 

Hey Mango, hope things are well with you. I bought the noesp mod that you have and i can hear the mod click but the esp/bas doesnt light up. the esp button is working like factory. there were two wires that were violet with the blue stripe but on of them was a lighter blue which is the one i spliced into with the red and yellow wires from the esp mod like the instructions say.... I am stoked about this... do you think I may have a bad module from them.... dang was all excited abou this thing..... got the coolit mod too but haven't tried it yet....