New To Foum
Hello Mopar Fans,
I'm new to the forum; A little about my car:
-Dodge Charger Daytona #3589 (Top Banana)
-I started doing all the regular bolt ons, such as body throttle spacer, Volant CAI, Borla Exhaust and Diablosports Predator Tune.
-It was not enough for me, so about a month ago I had installed an ATI Procharger Supercharger. It is running at 6-7 psi and I'm
working on upgrading the engine so I can bump it up to 10-16 psi. The problem is that nobody can tell me what upgrades I need to
do; The pistons and rods are an obvious pick but what else? I have call several performance shops here in Texas (Franks Racing in Houston is one), but they neverget back with me. Does anyone have any advice?
Many thanks,
Mauri (krypto68@gmail.com)
I'm new to the forum; A little about my car:
-Dodge Charger Daytona #3589 (Top Banana)
-I started doing all the regular bolt ons, such as body throttle spacer, Volant CAI, Borla Exhaust and Diablosports Predator Tune.
-It was not enough for me, so about a month ago I had installed an ATI Procharger Supercharger. It is running at 6-7 psi and I'm
working on upgrading the engine so I can bump it up to 10-16 psi. The problem is that nobody can tell me what upgrades I need to
do; The pistons and rods are an obvious pick but what else? I have call several performance shops here in Texas (Franks Racing in Houston is one), but they neverget back with me. Does anyone have any advice?
Many thanks,
Mauri (krypto68@gmail.com)
There is a distrubter for the Diable Sport programmer in Monroe, NC I talked to hime the other day and he seemed very knowledgeable about these motors. I dont have his number handy but I got it from thier websight. Maybe you could try him.
First off welcome to the forum TB 3589.
I have some off topic questions but I promise to get back to topic [&:]
It sounds like you installed the SuperCharger, is that correct?
Who tuned the setup?
I have some off topic questions but I promise to get back to topic [&:]
It sounds like you installed the SuperCharger, is that correct?
Who tuned the setup?
Again, Welcome to the forum. Good to have you here.
I would wonder about the same thing Mango asked - who tuned the set up. I know a guy here who put a SC on his SRT and promptly blew it up - too lean.
Another thing you'll have to "strengthen" is the tranny.
Keep us advised and updated on your progress.
Dave
I would wonder about the same thing Mango asked - who tuned the set up. I know a guy here who put a SC on his SRT and promptly blew it up - too lean.
Another thing you'll have to "strengthen" is the tranny.
Keep us advised and updated on your progress.
Dave


