The guy at Autozone says my check engine light is on because I need to replace my thermostat. So, I bought the part, and *should* be able to do this relatively easily, right?

 

Yes, it's no big task. Two bolts and a little fluid loss. Be sure to let it cool down prior to starting. I believe you'll need a 11 or 12mm wrench or socket (socket with a small extension is my choice of tool for this). You may need a small screwdiver to get the OEM t-stat to pop out, be careful not to damage the rubber gasket around it's edge of the t-stat which you will re-use.

 

BTW... do you know what the code # was?

Also, here are some "how to" videos" on the t-stat removal and replacement brought to you by PowerWagon896 on his 06 Daytona 5.7.

PART 1
PART 2

 

Do u have a picture of where the thermostat is on the 5.7 charger mopar edtion 2011model