Airbag light on
 

My 2010 SXT charger was in a mild collison and I have replaced all of the damaged parts. I installed new airbags but the airbag light remains on. I did not replace the clock spring in the steering wheel. Is there a module that must be reset after the airbags are blown or could I have another issue? I have hooked up a simple OBDII scanner to the car and it doesn't show any trouble codes. I'm at a loss.

just found myairbags.com, we shall see how this goes.

Adam,

Did you find the information you were looking for at the airbag.com website? If you are still looking how to resolve the airbag light concern I would recommend talking to a Dodge dealer, they will be able to advise what parts you need specifically for your vehicle and point you in the right direction.

Ignoring the Airbag Warning light could mean you won't have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, it is suggested as per the Owner's Manual, page 60, to have an authorized dealer service the airbag system immediately.