Dodge Charger The Dodge Charger. The car that made its competitors shiver in the 60's is reborn in 2006 into a sleek sedan that can still send the competition home wimpering, the Dodge Charger.
Sponsored by:
Sponsored by: CARiD

Mutiple engine codes and a/c not blowing cold too

Thread Tools
 
Search this Thread
 
Old Jun 23, 2017 | 03:15 PM
  #1  
Ross america's Avatar
Ross america
Thread Starter
|
Registered User
Joined: Jun 2017
Posts: 2
Likes: 0
Default Mutiple engine codes and a/c not blowing cold too

My charger is throwing codes p050b. And randomly flashing lights, traction control light and the lightening bolt in parentheses. Flashing randomly while driving. I'll stop and turn car off then vack on. And it will go away for the time being.. while all this is going the same time this happen. My AC stopped blowing cold... found out that the electrical part of my a/c compressor is bad... or not working.... is this all a coincidence or does any of those lights and codes have anything to do with my AC not blowing cold ?
 
Reply
Old Jun 23, 2017 | 03:59 PM
  #2  
DodgeCares's Avatar
DodgeCares
Champion
10 Year Member
Joined: Jul 2011
Posts: 3,053
Likes: 28
From: Mopar HQ
Default

Originally Posted by Ross america
My charger is throwing codes p050b. And randomly flashing lights, traction control light and the lightening bolt in parentheses. Flashing randomly while driving. I'll stop and turn car off then vack on. And it will go away for the time being.. while all this is going the same time this happen. My AC stopped blowing cold... found out that the electrical part of my a/c compressor is bad... or not working.... is this all a coincidence or does any of those lights and codes have anything to do with my AC not blowing cold ?
Hi Ross america,

The code is for Cold Start Ignition Timing Performance. Are you working with your Dodge dealership to diagnose or repair your vehicle?

Kori
Dodge Social Care Specialist
 
Reply
Old Jun 23, 2017 | 04:03 PM
  #3  
Ross america's Avatar
Ross america
Thread Starter
|
Registered User
Joined: Jun 2017
Posts: 2
Likes: 0
Default No

After dealing with the mechanics we figured out that my EGR valve tube is missing a seal where it connects to the intake manifold there's hissing coming out of there which is created a big leak for some reason that is throwing the p050b ignition timing code what I'm trying to figure out is if any of this has anything to do with my AC compressor electrical part not working because both of these things happened at the same time AC stopped blowing cold and these lights came on
 
Reply




All times are GMT -4. The time now is 01:54 PM.