o.k. , iwas at shop getting headers & exhaust done, and one off the guy told me about these sensors. they on the inner wheel wells just toward the back. these are the abs sensors he told me to disconnect them and this shuts off abs tracking system. BE CAREFULL. went home disconnected them' you will also need to tie them up to keep them out off the way. man what a different car . boy you talk about a texas burn out .
i was also able to wip up some real dougnuts. no problems att all.
i would not recommend this this on the slippery roads for the horses will come out and there may be handling problems.
after i was done hooked it all back up and have no warning light's come on in dash. now i'v got something for you guys , hope you all have fun with this mod.


go mang 1342
mopar cai.
mopar long tube headers
rear defuser
corsa exhaust

73 charger se 440
475 hp
355 gears
mustang killer

 

Whats your thoughts on the headers/exhaust and what did you go with?

 

the header are awsome the exhaust is good ,just the price 800. a little high.
they will most likly go down now ,
but the way the headers to into the high flow cats is real good
they don't bottleneck , there just that high flow , the dealer did some tuning to . he was a vary cool dude.



go mango 1342
mopar cai
mopar headers
rear defuser

73 charger se 440
475 hp
355 gears
mustang killer

 

I'm assuming you know that ABS stands for Anti-Lock Braking System. These sensors are used to control braking as well as the TCS (Traction Control System) function for HAL. As long as you're aware of that, have fun. BTW did you remove the sensors or just disconnect them. Interesting that you don't get an ABS sensor failure code.

Redbeard

 

i disconnect tem
with no problems