Any ideas on what this should cost me???
#1
07-02-2008, 05:09 PM
Thread Starter
Join Date: Feb 2008
Location:
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Any ideas on what this should cost me???
I have a 98 dak r/t and I'm goin to have the front end done. I have all the part and just need a shop to
do the work. Inner and outer tie rods, upper and lower ball joints and the polly bushings.
Can a few people give me some ideas on what I should expect to spend on havin someone do the work to put it
all in and allignment as well.
thanx in advance..
do the work. Inner and outer tie rods, upper and lower ball joints and the polly bushings.
Can a few people give me some ideas on what I should expect to spend on havin someone do the work to put it
all in and allignment as well.
thanx in advance..
#2
07-03-2008, 07:07 AM
Veteran
Join Date: Sep 2005
Location: Eastern MA
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
RE: Any ideas on what this should cost me???
I had the tie rods and a few other things done and it was $500 (brakes, oil change, etc... I'm getting lazier as I get older).
#3
07-13-2008, 04:40 AM
RE: Any ideas on what this should cost me???
I have a 98' dakota sport w/5.2 v8, and I just had the upper & lower ball joints replaced along with the upper control arm bushings(the lower arms were still in good shape), and the inner & outer tie-rods, & the stabilizer link kits. Both sides were replaced. parts cost me $350.00 & labor cost me $480.00. I purchased Spicer brand parts. Don't get factory replacements, they can't be serviced. Good luck!!