Hi does anyone knoe how to chage the steering rack on a 1990 dodge daytona. The boot is falling off new one and would like to knoe how much time it would take to do this project?

 

Is the rack bad or do you just want to put new boots on the tierods? New boots are usually around $20.

To put new boots on you have to
!)disconnect the tierod from the steering knuckle (strut)
2)take the outer tierod off of the inner tierod (make sure to count the number of turns it takes to removes it, because you will need to turn it the same amount when reinstalling or your alignment will be off)
3)slip the new boot over the inner tierod
4)reinstall the outter tierod on the inner tierod
5)reinstall the outter tierod to the steering knuckle

 

Do you have a pic or know what boots can be replaced? Or i would like to know where i can find something like this. This would save 200.00 on a new steering rack. Thanks Chris

 

Almost any rubber grease boot can be replaced (cv boots, ball joint boots, tierod end boots, steering rack boots)
Here is what Advance Auto/ Checker/ Shucks/ Kragen carries http://www.partsamerica.com/ProductD...ype=24&ptset=A

 

Thanks for all your help guys. This forums have alway helped me
Thanks alot Chris