power loss light
Thread Starter
Joined: Oct 2006
Posts: 1
Likes: 0
power loss light
Please Help!!!! I have an 87 daytona shelby z, am having trouble with the turbo falling on it's face every time accelerator kicks turbo in, kind of acts like vapor lock situation, but it still runs and re-starts. The power loss light comes on and stays on for approximatly 5 minutes. When the light comes on it has a power surge, and again when light turns off. I have replaced the computer on the firewall, taylor wires, mallory coil, bosh plugs 4 electrode, the hollafact switch, fuel pump, fuel filter, fuel tank, and the head gasket. I have checked the vacuum lines and don't see anything unhooked cracked, and checked the connections on most of the car. Normally, it shows no codes in the self check mode, the other day it showed codes 15, 22, and then 55. Checking the codes, 15 is the speedometer which is not working, 22 is the temp sensor, and 55 is the end. Rechecking them after driving for ten miles shows no codes again. I am really confused and am having trouble finding information on the power loss light at all. Any help is greatly appreciated. Thanks.
Professional
Joined: Jan 2006
Posts: 202
Likes: 0
From:
RE: power loss light
I don't know much about this. But I believe if there is nothing wrong with the system, the codes will reset after a period of driving. The turbo thing could be a waist gate hanging. This happend to my 85 Daytona