4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Door Lock Problem

Thread Tools
 
Search this Thread
 
Old Apr 2, 2011 | 02:27 AM
  #1  
Der Dummkopf's Avatar
Der Dummkopf
Thread Starter
|
Professional
Joined: Jun 2010
Posts: 106
Likes: 0
From: California
Default Door Lock Problem

I have a 2009 Dodge Ram 1500 ST Quad Cab. And Since I got the truck I've had a problem with locking my doors. I Don't have keyless entry. So, everytime I get out of my truck I rely on the "lock" button on my door. Thing is, sometimes (not always), I hit the lock button and it doesn't respond. It takes about a minute to respond. What could be the problem? Should I take it to the dealership to inspect it?
 
Reply
Old Apr 2, 2011 | 11:57 AM
  #2  
roberttheall's Avatar
roberttheall
Professional
Joined: Feb 2006
Posts: 242
Likes: 0
From: America
Default

Originally Posted by Der Dummkopf
I have a 2009 Dodge Ram 1500 ST Quad Cab. And Since I got the truck I've had a problem with locking my doors. I Don't have keyless entry. So, everytime I get out of my truck I rely on the "lock" button on my door. Thing is, sometimes (not always), I hit the lock button and it doesn't respond. It takes about a minute to respond. What could be the problem? Should I take it to the dealership to inspect it?
Is it still under warranty? If not I would take the door panel off, and make sure the connection on the unluck/lock button is secure, maybe it is loose, unplug it and plug it back in and see what that does.
 
Reply
Old Apr 2, 2011 | 01:00 PM
  #3  
Der Dummkopf's Avatar
Der Dummkopf
Thread Starter
|
Professional
Joined: Jun 2010
Posts: 106
Likes: 0
From: California
Default

I believe its still under warranty, Its a 2009 and only has 17,000 miles on it.
 
Reply
Old Apr 5, 2011 | 02:06 PM
  #4  
08DodgeTRX's Avatar
08DodgeTRX
Professional
Joined: Dec 2008
Posts: 112
Likes: 0
From: Sherwood, AR
Default

Yeah take it in to check it out.....

btw, how do you like the bedarmor?
 
Reply
Old Apr 6, 2011 | 12:32 AM
  #5  
Der Dummkopf's Avatar
Der Dummkopf
Thread Starter
|
Professional
Joined: Jun 2010
Posts: 106
Likes: 0
From: California
Default

The Bed Armor is actually quite nice. It took a little while to prep the whole bed, but it was well worth the work.
 
Reply
Old Apr 6, 2011 | 06:07 PM
  #6  
lineguy's Avatar
lineguy
Amateur
Joined: Mar 2009
Posts: 35
Likes: 0
From: Iowa
Default

Let us know what you figure out. Some may not agree but this seems like the same issue those of us with remote locks are having with our remotes not working. There is a very long post about this. I have had it where my remote wouldn't work and I had my window down so I reached in and the lock button wouldn't work, let it sit for a short while and it started working. Let us know what they find.
 
Reply
Old Apr 8, 2011 | 10:06 AM
  #7  
Tuck479's Avatar
Tuck479
Amateur
Joined: Dec 2010
Posts: 32
Likes: 0
Default

I notice that my door lock did that to me once as well (09 ram 1500 quad cab 4x4) but it hasn't since....
 
Reply
Old Apr 8, 2011 | 02:05 PM
  #8  
djr04's Avatar
djr04
All Star
Joined: Jul 2006
Posts: 807
Likes: 0
From: South Dakota
Default

I had the same problem on my 09 1500. It had the factory remote start/keyless entry and sometimes both the remote and the door switch would fail to lock/unlock the doors. Since I have replaced the factory remote start with an aftermarket with 2 way capability, I haven't noticed the problem once, and I tend to still use the factory key to lock/unlock the truck.
 
Reply
Old Apr 8, 2011 | 03:14 PM
  #9  
Dr. Bill's Avatar
Dr. Bill
Veteran
Joined: Jan 2009
Posts: 419
Likes: 7
Default

I have a 2009 CC and my lock button fails to work pretty often. It acts more like an electronic/computer confusion rather than a switchware problem. I have the remote start keyless entry and many times if I unlock the door with the fob and grab something and quickly try to lock with the switch, it will not work for several attempts. It acts like it has to clear some junk out of memory. It is very irritating, but many things about the 4th Gen irritate me.
 
Reply
Old Apr 8, 2011 | 11:31 PM
  #10  
Kbabiasz06's Avatar
Kbabiasz06
Registered User
Joined: Mar 2010
Posts: 38
Likes: 0
From: Macomb
Default

Originally Posted by Der Dummkopf
I believe its still under warranty, Its a 2009 and only has 17,000 miles on it.
Warranty for that is covered under 3yr/36000 mile. Unless you have a service contract then its covered under the length of that contract
 
Reply



All times are GMT -4. The time now is 04:01 AM.