While I was installing the UConnect system I noticed a wire behind the dash and below the radio. (this is on a 2011 Ram). The wire was taped back and it had a maybe 6 or 8 pin connector on it. It was taped to one of the plugs going into the center of the dash assembly and split off from the same loom. I think it was connected to one of the plugs that runs the buttons on the front of the console for the hazard lights, traction control, etc. Does anyone know what it would be for? My console has 4 buttons on it Hazard in the middle two on the left of the hazard button and one to the right. There looks like there is space to the right for one more button.

Anyone have a clue?

Thanks all,
Mike

 

heated and A/C seat options

 

I have a wire like that too but instead of taping it to the loom they plugged it into a phoney spot, there is a row of phoney spots to hold wires.LOL.

 

pictures always help

 

I would say the seats as well.

 

Some came with 120 volt outlets some didn't. Also heated and vented seat controls as well