4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Found these on Ebay, anyone have them installed, esp. on a lifted truck

Thread Tools
 
Search this Thread
 
Old Aug 27, 2012 | 08:32 AM
  #1  
rolltidehemi's Avatar
rolltidehemi
Thread Starter
|
Captain
Joined: Mar 2009
Posts: 572
Likes: 0
From: cooper city, florida
Default Found these on Ebay, anyone have them installed, esp. on a lifted truck

Watch the first youtube video first, seems they changed the setup from the video below to a better setup IMO.

http://www.youtube.com/watch?feature...&v=lhWR24nNfJg
www.totalloadcontrolsuspensions.com/

 

Last edited by rolltidehemi; Aug 27, 2012 at 08:42 AM.
Reply
Old Aug 27, 2012 | 09:24 AM
  #2  
oldjeep's Avatar
oldjeep
Champion
Joined: May 2009
Posts: 3,497
Likes: 1
From: MN
Default

The only picture that they show of a coil sprung setup like the ram has, shows the bag awfully close to the stock coil. Be curious to see a video of that setup in action.

Other than that, the idea of helper airbags inboard of the stock suspension isn't exactly a new thing
 
Reply
Old Aug 27, 2012 | 11:30 AM
  #3  
rolltidehemi's Avatar
rolltidehemi
Thread Starter
|
Captain
Joined: Mar 2009
Posts: 572
Likes: 0
From: cooper city, florida
Default

Originally Posted by oldjeep
The only picture that they show of a coil sprung setup like the ram has, shows the bag awfully close to the stock coil. Be curious to see a video of that setup in action.

Other than that, the idea of helper airbags inboard of the stock suspension isn't exactly a new thing
Click on the first youtube link on the page or go to their site there is a video of the suspension itself in action with bags off and on and without the white metal support bars on the first vid, it seems they re-did the way they install it.
 
Reply
Old Aug 27, 2012 | 01:32 PM
  #4  
oldjeep's Avatar
oldjeep
Champion
Joined: May 2009
Posts: 3,497
Likes: 1
From: MN
Default

OK - I see that. Looks pretty decent although personally I don't have any issues with sticking 800lbs or so in the bed. On a 2wd that makes it sit level and it actually rides very well. For folks who have felt the need to "level" the truck then you would need to do something to keep it from dragging rear down.
 
Reply




All times are GMT -4. The time now is 05:29 AM.