thought i would put this here since it's srt parts and many people don't go to the buy/sell section. move it if appropriate admin team!

Borla/Mopar cat-back w/3" to 2.5" reducer: $250 - I really don't want to ship this as I had it welded to prevent any leaking, so the pipes are rather long.

Stage 2 ecu (toys ready): $240 - sold

Mopar/Autolite EGT Gauge w/sensor (never installed): $140

Mopar 3D Taillights - $100

 

Kind of off topic a bit...but I need the probe for the EGT guage. I have the mopar EGT guage but no probe...I had the probe but don't anymore...don't ask why. So I will need the probe in short term future. Know where to get just the probe at for this guage?

 

Do you have to drill and tap the Manafold for the EGT gauge?

 

to place the probe in the correct position, yes, it does require drilling and tapping the manifold. however what i was planning on doing, and many other people have done, is to mount the probe in the o2 housing. the temps read about 100 degrees lower.

 

Where are most people puttin them on SRTs? I have a new manifold/turbo assembly just sitting here. So I could pretty easily get it drilled and tapped.

 

here's the how-to

 

Sweet, thanks for the link. Thats where I was going to put it if no one said anything.

 

So with the stage 2 you are willing to send the toys???????

 

no, the toys are still in use on the car, can't send those.

 

so with the stage 2 ecu what all would i have to buy to go with it not really worried about toys at this time yet and i have an 05 bone stock