DIY- Do it yourself
Banned
Joined: Jan 2004
Posts: 10,136
Likes: 1
From:
RE: DIY- Do it yourself
ORIGINAL: Viper-GTS
I could help people in strategic assasinations, mass murder and bank heists... but that's besides the point
-Matt-
I could help people in strategic assasinations, mass murder and bank heists... but that's besides the point
-Matt-
And the FBI is now watching every post you make, every bank transaction, listening to all phone calls, and remote sensing your life. Let's hope not anyway.
This reminds me of that little geek that used to post here, what was his name? Squeek or something.
RE: DIY- Do it yourself
Amanda put this in that section:
Auto Exhaust Flame Thrower by The Jolly Roger
For this one, all you need is a car, a sparkplug, ignition wire and a
switch. Install the spark plug into the last four or five inches of
the tailpipeby drilling a hole that the plug can screw into easily.
Attach the wire (this is regular insulated wire) to one side of the
switch and to the spark plug. The other side of the switch is attached
to the positive terminal on the battery. With the car running, simply
hit the switch and watch the flames fly!!! Again be careful that no
one is behind you! I have seen some of these flames go 20 feet!!!
-------------Exodus------------
Auto Exhaust Flame Thrower by The Jolly Roger
For this one, all you need is a car, a sparkplug, ignition wire and a
switch. Install the spark plug into the last four or five inches of
the tailpipeby drilling a hole that the plug can screw into easily.
Attach the wire (this is regular insulated wire) to one side of the
switch and to the spark plug. The other side of the switch is attached
to the positive terminal on the battery. With the car running, simply
hit the switch and watch the flames fly!!! Again be careful that no
one is behind you! I have seen some of these flames go 20 feet!!!
-------------Exodus------------
Thread Starter
|
Legend
Joined: Jul 2004
Posts: 9,606
Likes: 0
From:
RE: DIY- Do it yourself
ORIGINAL: nickoman01
Amanda put this in that section:
Auto Exhaust Flame Thrower by The Jolly Roger
For this one, all you need is a car, a sparkplug, ignition wire and a
switch. Install the spark plug into the last four or five inches of
the tailpipeby drilling a hole that the plug can screw into easily.
Attach the wire (this is regular insulated wire) to one side of the
switch and to the spark plug. The other side of the switch is attached
to the positive terminal on the battery. With the car running, simply
hit the switch and watch the flames fly!!! Again be careful that no
one is behind you! I have seen some of these flames go 20 feet!!!
-------------Exodus------------
Amanda put this in that section:
Auto Exhaust Flame Thrower by The Jolly Roger
For this one, all you need is a car, a sparkplug, ignition wire and a
switch. Install the spark plug into the last four or five inches of
the tailpipeby drilling a hole that the plug can screw into easily.
Attach the wire (this is regular insulated wire) to one side of the
switch and to the spark plug. The other side of the switch is attached
to the positive terminal on the battery. With the car running, simply
hit the switch and watch the flames fly!!! Again be careful that no
one is behind you! I have seen some of these flames go 20 feet!!!
-------------Exodus------------
RE: DIY- Do it yourself
i haven't tried it yet... but it seems to make sense the way it is. electrical currents going to the spark plug would make it spark the exhaust.