Dodge Forum Site Issues and Suggestions Having an issue with the DF software? This is your section!

Ecm

Thread Tools
 
Search this Thread
 
Old Sep 29, 2010 | 10:34 AM
  #1  
Smokein's Avatar
Smokein
Thread Starter
|
Registered User
Joined: Sep 2010
Posts: 1
Likes: 0
Default Ecm

Does any one know if the factory ECM can be reprogrammed to up grade the engine out put
 
Reply
Old Sep 29, 2010 | 01:37 PM
  #2  
TNtech's Avatar
TNtech
Site Moderator-Dodge Tech
Joined: Sep 2010
Posts: 3,724
Likes: 22
From: Nashville, Tennessee
Default

Originally Posted by Smokein
Does any one know if the factory ECM can be reprogrammed to up grade the engine out put

This is for Personal Computers, not On Board vehicle computers
 
Reply
Old Sep 30, 2010 | 02:17 AM
  #3  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

TNtech is correct, but I will answer your question regardless.

Pretty much, yes. Its called a tuner. Depending on your model year and exact vehicle, it can do a little or a lot for you.

Post your vehicle information and what exactly you want to do as far as "upgrade the engine output" in the appropriate part of the forum (2nd Gen Ram for 1994-2001 Dodge Rams, or the Dakota section for Dakotas, or... etc. etc.), and you will get a lot of answers, better than you could get here in the Personal Computer section.
 
Reply




All times are GMT -4. The time now is 12:41 PM.