Dodge Journey Dodge Journey forum for discussion on the popular Dodge Crossover and CUV.

Help my journey on it's journey

Thread Tools
 
Search this Thread
 
Old Aug 8, 2018 | 10:42 PM
  #1  
rich blackman's Avatar
rich blackman
Thread Starter
|
Registered User
Joined: Aug 2018
Posts: 2
Likes: 0
Default

I have a 2009 Dodge journey 4 cylinder 2.4L. I keep getting cylinder 4 misfires code. I have changed my spark plugs and coil. I can drive it fine for about 30 min. Then when I take off from a dead stop it sputters until I get up to about 25 mph then it runs great. I have no idea what to try next any help is welcomed it has 120,600 miles and now I only drive it on weekends extra car. Thanks in advance for any and all help

I have a 2009 Dodge journey 4 cylinder 2.4l .I have changed my spark plugs and coil after getting misfire 4 cylinder reading. After changing I can drive it for about 30 min. Then after every stop it hesitates and sputters at take off till I get to about 25 then it runs fine. Any help will be greatly appreciated. Thanks in advance
 

Last edited by jkeaton; Aug 11, 2018 at 08:24 AM.
Reply
Old Aug 11, 2018 | 08:24 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,203
Likes: 363
From: Winston Salem, NC
Default

Check engine light on? What plugs did you use? When did this start?
 
Reply
Old Aug 11, 2018 | 08:32 AM
  #3  
rich blackman's Avatar
rich blackman
Thread Starter
|
Registered User
Joined: Aug 2018
Posts: 2
Likes: 0
Default Thanks for responding

Yes check engine light is still on. Sometimes it will go off then start flashing. I used autolight iridium xp spark pliug. After changing plugs and coil it runs great till it heats up. I was thinking a leaky fuel injector on cylinder 4
 
Reply




All times are GMT -4. The time now is 06:45 AM.