Dodge Magnum The Dodge Magnum, the wagon that made wagons cool. The unique look of the Dodge Magnum makes any trim level, from SE to SRT-8, an absolute head turner.

Curious about leather seats..

Thread Tools
 
Search this Thread
 
Old Nov 9, 2006 | 12:52 AM
  #1  
jcs11236's Avatar
jcs11236
Thread Starter
Joined: Jan 2006
Posts: 19
Likes: 0
Default Curious about leather seats..

Hey guys.. A junk yard near my house is selling the full leather seats for a 2005/2006 magnum. I was wondering if i could install these seats in my SE model? Do i have to do some modifications or could i just pull out the cloth seats and install the leather seats? i dont have a power passenger seat or heated seats... Is there a harness hiding somewhere under my passenger seat so that leather power seat would work? And if i install the heated seat switches on the dash will it heat the leather seats? Sorry for all these dumb questions but i know you guys could help! I really wanna buy these seats...
 
Reply
Old Nov 9, 2006 | 12:01 PM
  #2  
GOODHOODGUY's Avatar
GOODHOODGUY
Joined: Jan 2004
Posts: 8
Likes: 0
From:
Default RE: Curious about leather seats..

I would suggest visiting a local upholstery shop and getting some additional information. The seats should be the same. I have a full leather kit from a SRT8,but they are different for sure.
There may also be air bag sensors to consider.
 
Reply
Old Nov 9, 2006 | 12:33 PM
  #3  
shiltz's Avatar
shiltz
Captain
Joined: Mar 2004
Posts: 549
Likes: 0
From:
Default RE: Curious about leather seats..

There shouldn't be any problems installing them in, all LX seats mount the same so they will physically fit fine, the passenger airbag sensor "should" be re-calibrated every time you remove the seat, sometimes it will work fine, other times it will be screwed up till it's done (I’ve removed and replaced mine and it's been fine without a re-calibration). On the wiring I’m fairly certain there is one universal wiring harness used on all Magnum/300/Charger's so all the necessary cable connections should be there and should only need the switches and probably the fuses related to those component installed if not already.
 
Reply




All times are GMT -4. The time now is 04:20 PM.