No trigger to injectors and coils from pcm.
Thread Starter
|
Registered User
Joined: May 2022
Posts: 1
Likes: 0
No trigger to injectors and coils from pcm.
This is going to be a long post. But I am at my wits end with this thing. So 2 months ago I was driving down the road and my nitro just dies. We were doing 50 mph and I went to push the throttle and she all of a sudden acted as if she was starving for fuel and dies. I crank her over and nothing all she does is turn over. This is everything we have tested and replaced.
So here is everything that we have found. And still won't start. As I dont know what is causing it.
The tipm has signal.
There is no signal to coils
No signal to injectors
Crank sensor has full power
Cam sensor is a little funny
We though well maybe the fuel rail so we pulled it and did starting fluid test still nothing.
tested the fuel pressure and its amazing also.
I am at a complete loss of now.
checked the powers to circuit and was working under crank. Problem I was having was no trigger to injectors and coils from pcm. The asd relay controls power to these parts. Sounds like tipm controls power to the relay?
but tipm has full power.
Does anyone know where to go with this.
So here is everything that we have found. And still won't start. As I dont know what is causing it.
The tipm has signal.
There is no signal to coils
No signal to injectors
Crank sensor has full power
Cam sensor is a little funny
We though well maybe the fuel rail so we pulled it and did starting fluid test still nothing.
tested the fuel pressure and its amazing also.
I am at a complete loss of now.
checked the powers to circuit and was working under crank. Problem I was having was no trigger to injectors and coils from pcm. The asd relay controls power to these parts. Sounds like tipm controls power to the relay?
but tipm has full power.
Does anyone know where to go with this.