anyone install sill plates or door protectors?
All Star
Joined: Jun 2005
Posts: 750
Likes: 0
From:
RE: anyone install sill plates or door protectors?
The ones that are installed on my truck look like they were installed with self tapping screws. Not how I would have installed them, but they came with the truck.
I would get the double sided tape
I would get the double sided tape
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
RE: anyone install sill plates or door protectors?
just plain normal double sided tape (thin) or butyl tape stuff? The ones i got from ebay were slightly used and they have grey looking spongy thick tape like silicone(butyl). would that be better?
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
RE: anyone install sill plates or door protectors?
the double sided tape doesnt hold them down . i wonder if 1 small rivet on each end would do the truick. i can get the back to stay down with tape and silicone but the front are way longer.
Thread Starter
|
Captain
Joined: May 2007
Posts: 528
Likes: 0
From:
RE: anyone install sill plates or door protectors?
i used methyl hydrate. I did wipe them good. The double sided tape was usued from the previous owner but was in ok shape and was sticky yet. i dont know what to use