I just read the FAQ on the pyro tapping for the 5.9, but it looks as though I will have to tap the 6.7 where the manifold joins with the turbo housing. Looks like a right angle drill job. Any suggestions, I really don't want to screw this up.

 

I realy dont see too much of a difference. . .I would just be more worried about metal shavings and how the DPF would handle them.

 

Its already got three of them on there, maybe they will come out with something like the attitude that will read it off the ecm.

 

ask hilden he has a edge attitude for his 6.7L already. He's one of the "beta" testers or w/e you wanna call it.

 

Yes, the Edge Juice w/ Attitude for the 6.7L comes with a thermocouple for the exhaust manifold. I had a local shop install it for me. I'll take a look tomorrow to see where they drilled the hole.

 

yeah I can see the factory one on the manifold and the two others on the exhaust. But the attitude does not read them I guess, it sure would be nice to get those 3 readings.

 

Here's a photo that shows where my thermocouple is installed for the Edge Juice w/ Attitude. I hope this works. I always seem to have trouble showing photos on these posts.

 

My bad, posted under wrong topic. Brain fart.

 

Thank you, that looks a bit easier than I thought.