Well I am about to be getting the diablo power puck chip and stack it with my hypertech power programmer III,so that should have the boost fooler in it correct?

 

the power puck should have the fooler built in it.

 

Cool, thanx man I really apprieciate your help.

 

No problem

 

my kit just came with the brass elbow

 

Couldn't find a part number for the brass plug. I'll talk to some of the preformance shops around here this weekend about it and see what they say.

 

i took the plug out of the elbow and filed it to fit in the steel elbow tight but it didnt give me anymore boost.

 

do u know if the holes are the same size between the two of them?

 

that brass elbow should have an allen head on one side. . .that is where you can adjust your boost.

 

The problem is on the autos, they run a metal line wastegate so the boost elbow doesn't work on them. That little brass plug that came with mine, you could bearly see any light through the hole in it. Plus then they have you drill a hole in the wastegate line after the plug so theres no chance of that wastegate opening.