Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Edge chip

Thread Tools
 
Search this Thread
 
Old Nov 10, 2007 | 03:05 PM
  #1  
simonsj's Avatar
simonsj
Thread Starter
|
Registered User
Joined: Aug 2007
Posts: 26
Likes: 0
Default Edge chip

I installed a chip(edge) on my truck and i noticed my transmission would be shifting up and down when driving approximately 50km/h. Is this normal????

2001/Ram /5.9/cummins/auto
 
Reply
Old Nov 10, 2007 | 10:35 PM
  #2  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: Edge chip

Clean your battery terminals and all the grounds you can find onthe engine and trans. These transmissions are very picky and a little corrosion on the grounds and bat terminals causes the t/c to lock and unlock.
 
Reply
Old Nov 12, 2007 | 12:23 PM
  #3  
owp004's Avatar
owp004
Joined: Nov 2007
Posts: 1
Likes: 0
From:
Default RE: Edge chip

I also have the edge chip in my 99 dodge. I was wondering if the battery terminals that u are talking about would cause my truck to stay in the drive gear even stopped at a stop light or something. I have an automatic(i'm sure u assumed that already)with 115000 miles. I thought it was just a torque converter problem so i bought a new one this morning.
 
Reply




All times are GMT -4. The time now is 09:27 PM.