HELP !!! - I can't find the oil pressure sending unit

Subscribe
Jan 13, 2008 | 05:18 PM
  #11  
RE: HELP !!! - I can't find the oil pressure sending unit
What a PITA !!!!!!

Igot it. No wonder i couldn't find it. It's hiddendown towards the bottom behind the stock fuel filter housing.You'll need 7 foot arms that are nowider than a pencil that bend in several different directions at the same time to get to it. I FINALLY got the boot off, blew both the sensor out and the boot with compressed air, filled em both with dielectric grease, and FINALLY got the boot back on. Here are some pics of where it's located. Hopefully I don't need to replace the sensor. If so, it's gonna wait till spring for sure. It's starting to get COLD outside !!

Here it is ...

Name:  ECM-OilSensor024.jpg
Views: 4656
Size:  40.2 KB

Name:  ECM-OilSensor022.jpg
Views: 5192
Size:  52.1 KB

I hope this helps the next poor soul looking for it.


Reply 0
Jan 13, 2008 | 07:27 PM
  #12  
RE: HELP !!! - I can't find the oil pressure sending unit
linked into the FAQ thread

Reply 0
Jan 13, 2008 | 07:39 PM
  #13  
RE: HELP !!! - I can't find the oil pressure sending unit
Amazing how close my diagram is to the actual picture. Great pic Mayfair. That really shows it great...
Reply 0
Jan 13, 2008 | 10:39 PM
  #14  
RE: HELP !!! - I can't find the oil pressure sending unit
Well ... the bad news

I took it off, cleaned it all up as best as I could, re-packed it with dielectric grease, and the gauge didn't budge. It's still on zero and my check gauges light is still on ( convietly covered with a business card ) I guess I'm gonna hafta replace the sensor. [:@]
Reply 0
Jan 13, 2008 | 11:25 PM
  #15  
RE: HELP !!! - I can't find the oil pressure sending unit
That sucks mayfair, but look at it this way: another wonderful opportunity for you to do a write up(if you take pics). Quit slackin, dont wait for spring; every time you see that card, you'll remember and you'll go insane
Reply 0
Jan 14, 2008 | 12:11 AM
  #16  
RE: HELP !!! - I can't find the oil pressure sending unit
I don't knw if it's write up worthy, but you know I'll take pics.

Reply 0
Jan 14, 2008 | 08:09 AM
  #17  
RE: HELP !!! - I can't find the oil pressure sending unit
pics will do well enough. . .the pictures you took does a good job of showing where the dang thing is.
Reply 0
Subscribe