Response from Billet Badges
#11
06-04-2008, 08:09 PM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
Right now, the bigger 3 color one with the "C" is $55.
The smaller one, without the "C" is $45.
I already spoke with Geno's and they may be ordering some, so the prices "may" come down after the initial batch.
He's gonna get me a picture as soon as the first ones are cut.
The smaller one, without the "C" is $45.
I already spoke with Geno's and they may be ordering some, so the prices "may" come down after the initial batch.
He's gonna get me a picture as soon as the first ones are cut.
#12
06-04-2008, 08:10 PM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
ORIGINAL: Mayfair
Can they do a round one as a grill insert similar to the one that TRD does?
Can they do a round one as a grill insert similar to the one that TRD does?
Go to his site....
www.billetbadges.com
He already has some pretty cool ones that go in place of some of the stockers.
If there is something specfic that you want, show him a picture......even scribble it on some paper and scan it and he'll render you and image like the one he sent back.
Once he does the programming, it's just a matter of loading the blanks and putting in the right cutters and off it goes.
#13
06-05-2008, 10:14 AM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
Guys, please see the e-mail below from Steve.
The cutoff date for the GROUP ORDER is June 20th. That gives everyone a few paydays to play with.
After that, the price goes up to what thwy would normally cost to have done.
See the highlighted areas below.
The cutoff date for the GROUP ORDER is June 20th. That gives everyone a few paydays to play with.
After that, the price goes up to what thwy would normally cost to have done.
See the highlighted areas below.
Rich,
I will try and get your set of badges out right away. I am going to try and get them milled out late next week. One thing I forgot to mention is that to make a group buy work at this special price, I need a cut off date for the group buy. This way I will be able to run all the badges in a batch using the same setup. So on the forum, people need to know that on whatever date, the final order tally will be taken and that is what will be produced. After that, the price will go up to $70 each for the 3 color and $60 each for the 2 color.
People have started submitting order forms and I can keep track of them and even do the individual billing if you want, but nothing will get cut until after that cutoff date. It will take about 2-3 weeks to make all these badges depending on the quantity. Each badge takes about 50 minutes to mill out + polishing, painting, and shipping. So it takes roughly about 2 -3 hours per badge to produce. So if the final count is 30 badges, it will take about 60-90 hours to produce those badges. I just want to make this clear so that when the final date rolls around, these guys are not expecting the badges to ship on that date, it will be about 3 weeks after that date. Let me know if you have any questions. Thanks.
Steve
Billet Badges
I will try and get your set of badges out right away. I am going to try and get them milled out late next week. One thing I forgot to mention is that to make a group buy work at this special price, I need a cut off date for the group buy. This way I will be able to run all the badges in a batch using the same setup. So on the forum, people need to know that on whatever date, the final order tally will be taken and that is what will be produced. After that, the price will go up to $70 each for the 3 color and $60 each for the 2 color.
People have started submitting order forms and I can keep track of them and even do the individual billing if you want, but nothing will get cut until after that cutoff date. It will take about 2-3 weeks to make all these badges depending on the quantity. Each badge takes about 50 minutes to mill out + polishing, painting, and shipping. So it takes roughly about 2 -3 hours per badge to produce. So if the final count is 30 badges, it will take about 60-90 hours to produce those badges. I just want to make this clear so that when the final date rolls around, these guys are not expecting the badges to ship on that date, it will be about 3 weeks after that date. Let me know if you have any questions. Thanks.
Steve
Billet Badges
#14
06-05-2008, 01:55 PM
Rookie
Join Date: Jun 2004
Location: California, Central
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
#15
06-05-2008, 02:54 PM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
Check out this thread for details.
https://dodgeforum.com/m_1329778/tm.htm
He'll make anything you want, but the group price is for the ones noted.
Regular price is gonna be $70 for the 3 color and $60 for the 2 color.
https://dodgeforum.com/m_1329778/tm.htm
He'll make anything you want, but the group price is for the ones noted.
Regular price is gonna be $70 for the 3 color and $60 for the 2 color.
#16
06-05-2008, 07:22 PM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
This is part of an e-mail that you will receive from Steve when you order.
Flat rate shipping, for up to 3 badges is $8.
Flat rate shipping, for up to 3 badges is $8.
Thank you for your interest in the custom SRT-6 badge group buy from Billet Badges. I received your order request for 2 polished 2.5” X 8.75” “Cummins ‘C’ SRT-6 Turbo Diesel” badges with the 3 color paint and the smaller “SRT-6 Turbo Diesel” 2 color badge. The total for the 3 badges will be $155. Shipping for up to 3 badges is a flat rate of $8.
This group buy will end on June 20th, and orders will be tallied and milling will start on June 23rd. I will keep track of the orders and when they were placed. Orders will ship as they are completed and in the order that they were received.
This group buy will end on June 20th, and orders will be tallied and milling will start on June 23rd. I will keep track of the orders and when they were placed. Orders will ship as they are completed and in the order that they were received.
#17
06-07-2008, 08:08 AM
Thread Starter
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Response from Billet Badges
Folks,
Just a reminder that the group price for these is good through the 20th.
After that, the price goes up to $70 & $60.
He will begin cutting them on the 23rd and will ship them in the order they were received.
I should have mine before that, so I'll send pics as soon as I get them.
Just a reminder that the group price for these is good through the 20th.
After that, the price goes up to $70 & $60.
He will begin cutting them on the 23rd and will ship them in the order they were received.
I should have mine before that, so I'll send pics as soon as I get them.
