Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

oil change light

Old Jun 14, 2010 | 08:19 AM
  #1  
keith427's Avatar
keith427
Thread Starter
|
Amateur
Joined: May 2010
Posts: 30
Likes: 0
From: texas
Default oil change light

I changed the oil in my 2010 2500 for the first time friday. The change oil light came on at 3175 miles. I put in DELO 400 15-40 and new filter. I reset the the change oil light and went on. The next morning the light came back on. I reset it it again yesterday and it came back on again this morning? Any ideas?
 
Reply
Old Jun 18, 2010 | 01:10 AM
  #2  
mrfarrell's Avatar
mrfarrell
Veteran
Joined: Mar 2010
Posts: 328
Likes: 1
From: BC, canada
Default

how did you reset it?
 
Reply
Old Jun 18, 2010 | 08:25 AM
  #3  
keith427's Avatar
keith427
Thread Starter
|
Amateur
Joined: May 2010
Posts: 30
Likes: 0
From: texas
Default

I reset it by the book. Turn on the key, depress accelarator 3 times and turn off key. I have done this twice and it just comes back on. I am going to try and run by the dealership this morning.
 
Reply
Old Jun 18, 2010 | 08:38 AM
  #4  
dgb1320's Avatar
dgb1320
Registered User
Joined: Jun 2010
Posts: 5
Likes: 0
Default

keith how much did it cost you to do the oil change yourself? if you dont mind me asking.
 
Reply
Old Jun 21, 2010 | 08:24 AM
  #5  
keith427's Avatar
keith427
Thread Starter
|
Amateur
Joined: May 2010
Posts: 30
Likes: 0
From: texas
Default

It cost $45 for 3 gallons of oil and filter. Mac Haik Dodge has a special right now of 5 oil changes for $160, but you have to pay up front. I will taking advantage of this as its only about $32 a change. By the way, I reset the oil change light one more time and it stopped coming back on.
 
Reply
Old Jun 21, 2010 | 01:01 PM
  #6  
brettj2408's Avatar
brettj2408
Captain
Joined: Apr 2010
Posts: 724
Likes: 0
From: MINNESOTA
Default

make sure the floor mat isnt all the way also! turn the key to run with engine off and you should depress the pedal all the way to the floor then all the way back up 3 times within 5 - 10 seconds. then turn the key off then start the truck.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:57 AM.