Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

need help on rebuilt engine

Thread Tools
 
Search this Thread
 
Old Aug 14, 2012 | 11:24 PM
  #1  
derek_woods's Avatar
derek_woods
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 7
Likes: 0
Default need help on rebuilt engine

I have a 2005 2500 Cummings and I just bought a rebuilt engine. I have the super chips flashpaq and have been running it on the truck since the engine has been rebuilt. My question is, will this hurt the rings from seating correctly? I have just over 400 Miles on the new engine. I have drove it as I was instructed to. Ie: varying speeds and staying off the interstate the first couple hundred miles. I have also babied it. The flashpaq is not as aggressive as other tuners and I'm hoping I can Still run it through the break in period. If anyone has had experience or a definite answer, please help me out.
 
Reply
Old Aug 15, 2012 | 05:54 PM
  #2  
derek_woods's Avatar
derek_woods
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 7
Likes: 0
Default

anybody?
 
Reply
Old Aug 16, 2012 | 05:28 PM
  #3  
hillbilli's Avatar
hillbilli
Veteran
Joined: Jun 2011
Posts: 284
Likes: 0
From: ND
Default

"cummins"

I would wait until a couple thousand to really do anything, but as long as the timing isnt advanced too much, i dont think it would do any harm.
 
Reply




All times are GMT -4. The time now is 12:05 AM.