shortbedguy tread
May 24, 2015 | 12:47 PM
Joined: Jun 2013
Posts: 90
Likes: 0
b
I installed a 3 inch spacer and stretch the arm's a inch and a half to center the wheel on the fender
Oct 4, 2015 | 05:14 PM
Joined: Jun 2013
Posts: 90
Likes: 0
Pickup a 1st gen rear end with 3.07 gear
Oct 4, 2015 | 07:08 PM
Joined: Jun 2013
Posts: 90
Likes: 0
I got use set for Jesse James wheel 20x10 for the silver truck. I'm going to run 28" tires with the 3.07 gears
Oct 5, 2015 | 02:24 AM
Joined: Feb 2005
Posts: 3,710
Likes: 2
From: Skagit County, WA
That rebuild kit came with cylinders too?
Oct 22, 2015 | 01:11 AM
Joined: Jun 2013
Posts: 90
Likes: 0
Quote:
Originally Posted by
horatio102
That rebuild kit came with cylinders too?
Yes 40over
Oct 22, 2015 | 01:11 AM
Joined: Jun 2013
Posts: 90
Likes: 0
finally my dad got the ram 6500 grille from the motherland
Oct 24, 2015 | 11:37 PM
Joined: Jun 2013
Posts: 90
Likes: 0
finally installed the jesse james wheels and lower the front. I'm going to drop the rear about 10"
Nov 5, 2015 | 11:49 PM
Joined: Feb 2005
Posts: 3,710
Likes: 2
From: Skagit County, WA
I dunno about 10", but the back end definitely needs to drop down a bit. Good looking truck.
Nov 24, 2015 | 10:58 PM
Joined: Jun 2013
Posts: 90
Likes: 0
Nov 25, 2015 | 11:13 PM
Joined: Jun 2013
Posts: 90
Likes: 0
1st gen rear end 2nd gen hubs 3rd Gen front disc brakes on the rear
b
Pickup a 1st gen rear end with 3.07 gear
I got use set for Jesse James wheel 20x10 for the silver truck. I'm going to run 28" tires with the 3.07 gears 
1st gen rear end 2nd gen hubs 3rd Gen front disc brakes on the rear
