Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

2012 ram 3500 jerking/binding in reverse

Thread Tools
 
Search this Thread
 
Old Jun 4, 2020 | 12:10 AM
  #1  
Burns696's Avatar
Burns696
Thread Starter
|
Registered User
Joined: Jun 2020
Posts: 2
Likes: 0
Default 2012 ram 3500 jerking/binding in reverse

Hey guys, I also posted this in the 4th gen forum but that was before I realized there was a diesel only forum. Please see below.

Hey guys, new here so if this is somewhere else please let me know. I have a 2012 ram 3500, couple of go fast parts and a built 68rfe. About a week ago I stopped at the grocery store to get some milk, came back out, flashed up the Truck and went to reverse out of the stall. Got about 5 feet back ( struggling like I was butted up against a curb ) and it locked up solid. No more reverse, brakes fully released and bound up solid. Put it in drive and it moved forward easily, then backed out of the stall as normal. It seemed to do it only when hot but it did it yesterday morning from a cold start. Any ideas where a guy could start? I plan I’m ripping diff and trans pans off this weekend to check everything out but if someone has had this happen before it would be awesome to know what it was.
 
Old Jun 4, 2020 | 07:32 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,194
Likes: 362
From: Winston Salem, NC
Default

I'll leave the one in the 4th gen section. It gets more visibility than this section. Only need one thread on the same issue.
 




All times are GMT -4. The time now is 06:31 PM.