wiper problem
#1
wiper problem
I just bought a used 97 Dodge 2500 van and the wipers did not work. I replaced the motor and that did not work. Then when trying to turn the wiper switch on the on position I noticed a clicking sound coming from the glove box. Looked in side a found this little box about 2x3 inches called the pulse intermittent wipe control. Went everywhere looking for the part. Finally called a dealer and got a new one it was like $71 crazy for this little thing. But anyway put it in but still with the clicking and still not working. I don't know if it's a wiring problem or what?? If anyone has an any ideas PLEASE let me know it been a pain. Thanks
#3
Even if the intermittent wiper control box is shot, both low and high positions will still work. Since you heard a clicking sound I'll assume the fuse is good, but you might want to double check it just to be safe.
#4
yeah I replaced the fuses a couple different times to be sure. Also thanks for the diagram. Hopefully i can figure something out. I'll try looking at the switch again. If you have any other contributions let me know thank you.
#6