I wouldn't take anything posted by certain individuals seriously. Certain individuals demonstrate daily that they do not understand basic electrical wiring much less physics or chemistry. If you have nothing better to do with your time I recommend you backtrack through various individual's posts and you will discover a wealth of misinformation.

Some of us post here to try and assist people, others seem to post just to hear themselves talk.

 

According to the service manual, there are two wires in the connector to the motor, pins 3 and 4 that go directly to ground. Pin 3 goes to ground location G106 and is used for park switch sense. Pin 4 goes to ground position G103, and is used for motor ground.


Now you guys stop arguing and play nice, or I will tell your mommies!