Power window switch issue 92 b2500
Thread Starter
|
Registered User
Joined: Mar 2018
Posts: 2
Likes: 0
Power window switch issue 92 b2500
When i press on the pw switch, the window does not move however, the e brake light comes on (only when switch is on) ground issue??? No idea where to start....anyone have an idea where I should start? Thanx!!
Van & CUV Section Moderator
Joined: Nov 2006
Posts: 5,376
Likes: 115
I would start by disconnecting the window motor electrical connector and connecting a meter to it. Then press the switch in both directions and see if you get power like you should.
Last edited by alloro; Mar 14, 2018 at 10:12 AM.
Thread Starter
|
Registered User
Joined: Mar 2018
Posts: 2
Likes: 0
Alloro, Thanx so much for your response.....so today I tried (by your suggestion) and found the plug from the window motor and connected a test light on either of the wires and discovered that when window switch is depressed, test light confirms power, however I see that the E-BRAKE light on the dash DOES NOT light up when testing the plug on window motor, should I do the same check on passenger window motor? Thanx for your help again!!!!