Should be simple turn signal problem
Thread Starter
|
Registered User
Joined: Feb 2019
Posts: 2
Likes: 0
Should be simple turn signal problem
Howdy,
My turn signals stopped working. I replaced the flashers for both hazards and turn signals. Swapped them just in case. My hazards do work. I replaced the whole assembly in the steering column and can jumper the turn signal in the column, I think tomorrow I am going to unplug the harness from the turn/ hazard switch from the steering column and jumper the wires according to the wiring schematic to see whether its from the switch side or somewhere else.
My turn signals stopped working. I replaced the flashers for both hazards and turn signals. Swapped them just in case. My hazards do work. I replaced the whole assembly in the steering column and can jumper the turn signal in the column, I think tomorrow I am going to unplug the harness from the turn/ hazard switch from the steering column and jumper the wires according to the wiring schematic to see whether its from the switch side or somewhere else.
